27 products · Process Equipment
equipment-2.1
Liquid preparation system — Mobile magnetic stirring system
30/50/100/200/300/500/1000 L; frame and support vessel in brushed 304 stainless steel; magnetic motor drive — no mechanical seal, no stirring shaft pe…
equipment-2.10
Single-Use Pressure Sensor — B Series
Female Luer both ends; PP material; 60 psi range; sterilisable by irradiation or 121 °C moist heat; note: accuracy is unaffected at low doses, while a…
equipment-2.11
Data transmission cable
For data transmission and connection between pressure monitoring recorders or transmitters and sensors; supports both in-house device-to-in-house sens…
equipment-2.12
Hollow fiber TTF system — Prototype/Lab scale
Applications across pharmaceutical, fermentation and food industries: desalting and concentration of enzyme and protein solutions; purification of pha…
equipment-2.13
Hollow fiber TTF system — Pilot scale
Suitable for pilot-scale bioprocess trials and small-scale production; split design separating the circulation tank from the ultrafiltration section; …
equipment-2.14
Hollow fiber TTF system — Production scale
Production-scale automated ultrafiltration system with a high degree of automation, intended for industrial-scale production; applied to the separatio…
equipment-2.15
Stainless steel filter
Stainless steel microporous pleated filter with SUS316L or SUS304 housing; filters liquids (particles above 0.1 μm) and gases (above 0.01 μm); high fi…
equipment-2.16
Filter Integrity Tester Version 1.0
Tests filters of all types including membrane disc, capsule and cartridge formats; minimum detectable membrane disc Φ20 mm, maximum testable 5-cartrid…
equipment-2.17
Filter Integrity Tester Version 2.0
Precision instrument designed specifically for integrity testing of all types of filter cartridges; widely used in pharmaceutical, biotechnology, food…
equipment-2.18
Bag integrity tester
Pressure decay test method; supports manual entry and selection of different bag specifications; branded vacuum pneumatic control components; four-lev…
equipment-2.19
Wall-penetrating system
Single-use cross-grade wall-penetrating system that achieves aseptic transfer of multi-line fluids through a stainless steel channel and pre-sterilise…
equipment-2.2
Liquid preparation system — Desktop magnetic stirring system
Stirring of small volumes from 5–20 L, offering greater precision and a higher degree of integration; stirring speed 0–600 rpm; weighing accuracy C3 (…
equipment-2.20
Electric sterile disconnect pliers
Dimensions 390 × 110 × 80 mm, 3.3 kg; supplied as standard with 2 rechargeable batteries, 1 charger and 2 blade sizes; small blade fits tubing with ou…
equipment-2.3
Liquid preparation system — Magnetic levitation stirring system
Composed of two main modules — stirring mechanism and control system; a single control system can drive two stirring units in tandem; integrates stirr…
equipment-2.4
Multi-layer Liquid Storage Trolley
50 L three-, four- and five-tier liquid storage trolleys; 100 L three-, four- and five-tier liquid storage trolleys; specific configuration customised…
equipment-2.5
WAVE Bioreactor
10 L / 25 L / 50 L rocking bioreactor system; rocking angle ±15°; weighing accuracy 1% (using a well-known weighing brand); temperature control accura…
equipment-2.6
Pressure monitoring system — Portable pressure monitoring recorder
WYPMR-H01: compact and highly portable; million-record data storage; CSV output; 1–3 channel pressure acquisition with differential pressure display; …
equipment-2.7
Pressure monitoring system — Pressure monitoring recorder
WYPMR-V02: colour touchscreen, audible alarm, USB data export; multi-level user privileges, audit trail, intelligent threshold alarms and line-break a…
equipment-2.8
Pressure Transmitter WPT-101
Developed in-house by NEWMEEN; acquires data from three single-use pressure sensors simultaneously and transmits via 4–20 mA current or RS485; measuri…
equipment-2.9
Single-Use Pressure Sensor — A Series
Medical-grade resistive type; connector dust- and water-proof to IP67; pressure range −6 PSI to 60 PSI; accuracy: ±2% of reading (−6 to 0 PSI), ±2% (0…
equipment-2.21
500 L single-use bioreactor
500 L nominal working volume; single-use bag in a 316L stainless steel support tank; skid-mounted frame with an independent control cabinet; top-entry…
equipment-2.22
Glass bioreactor, 1.5–15 L
Single-layer borosilicate glass; 1.5 / 3.0 / 5.0 / 6.0 / 7.5 / 10.0 / 13.0 / 15.0 L; single, 2-, 4-, 6-unit and larger configurations; 0–1300 rpm; 5–6…
equipment-2.23
Stainless steel fermenter, 10–1000 L
Volumes: 10/20/30/50 L (lab), 100/200/300/500 L (pilot), 1000 L (production); 316L vessel with 304 jacket; mechanical agitation at 10–1000 rpm ±2 (lab…
equipment-2.24
Parallel bioreactor system, 0.5–1.5 L
Single-layer borosilicate glass; 0.5 / 0.8 / 1.0 / 1.3 / 1.5 L; single, 2-, 4-, 6-, 8-unit and larger configurations; 0–1300 rpm; 5–65 °C ±0.1 °C with…
equipment-2.25
Aseptic tube welder
Tubing sizes 1/8"×1/4", 1/4"×7/16", 3/8"×5/8", 1/2"×3/4" (4 adaptor sets included, up to 12 supported, custom adaptors available); compatible with C-F…
equipment-2.26
Aseptic tube sealer
Tubing OD 1/4"–1.0" (6.35–25.4 mm); type I up to 7/8", type II up to 1.0"; wall thickness 1/16"–1/8" (1.6–3.2 mm); compatible with C-FLEX, PharMed BPT…
equipment-2.27
αβ split butterfly valve
Metal-to-metal seat sealing; 316L stainless steel body; FKM seal compliant with FDA; OEL ≤0.1 µg/m³, OEB ≥5; pressure resistance ≥0.3 MPa with the pro…